Now these same baby girls are aged 20, 19 and 17. :( I doubt they'd go searching for red birds these days (unless the birds were weighted down with iTunes gift cards or cash,) but I've wanted to make some little red birds for our own tree for several years now. I finally put my ideas down on paper, and wrote out this tutorial while I was at it. . . which is what I'm sharing with you today!
This is a basic felt bird ornament, and I've included 6 different ways to embellish the ornament. I know there are at least a bajillion and one different ways to decorate these birds, so I hope you'll have fun mixing up these techniques, creating your own unique, personalized birds for your home and loved ones. These make pretty gift toppers, too!
Sewing level: beginner-plus and up
I recommend this tutorial for anyone who is comfortable with very basic sewing machine usage, and basic hand sewing skills. (And this is a perfect tutorial for building both those skills and confidence!)
Let's get started!
GATHER MATERIALS. . . .
- FREE pattern (print it out HERE, or HERE)
- felt (one rectangle will make 3 ornaments)
- fabric scraps
- burlap (option 3)
- lettered stamps and ink pad (option 4)... I got mine at Michael's in the $1 bin
- sequins, buttons, lace, baubles (option 5)
- embroidery floss and needle (option 6)
- ribbon, rickrack, cord or twine for hanging
- needle and sewing thread or sewing machine
- pen, pencil, disappearing marker, etc.
NOTE: Here, I will be describing Option 1, the felt bird with fabric wing. The Options 2 - 6 will be illustrated after the main tutorial, but they all come together basically in the same way.
** Cut out pattern.
** Using the pattern, cut 2 bird pieces and 1 wing piece from your choice of felt and/or fabric. (For each option, make sure at least one bird piece of your ornament is felt, as this is the backing and gives the ornament some "body.")
EMBELLISH. . . .
** This is the fun part! Embellishing your ornament is the first step.
** On the front, sew an eye on your bird. You can sew a french knot, using 3 or 4 strands of embroidery floss, or sew a button or bead on with sewing thread. A little dot of paint or sharpie will even do the trick! (I don't trust most glues for attaching things to felt, but if you have one you trust, go for it!)
** Next, pin the fabric wing to the bird front. . . .
. . . and sew the wing to the felt, stitching very close to the edge. Go slow and take your time.
** When you get to the point on the bird wing, STOP with the needle DOWN in your fabric.
** LIFT the presser foot, and PIVOT your fabric.
** Put your presser foot back DOWN, and start sewing again.
** If you want to decorate the back, perhaps adding the year or your name, do that now in your method of choice. (I embroidered the year on this one, using 2 strands of embroidery floss and a stem stitch.) Make sure you decorate the outside of the back piece. ;)
ASSEMBLE. . . .
** Place the two felt bird pieces together.
** Insert your hanging ribbon at the * location shown on the pattern, between the two felt bird layers, and pin it in place.
** Next, pin the two felt birds together, wrong sides together. Now, I personally hate pinning, and rarely do so, BUT... I do pin here. Felt and small fabric pieces can be shifty and stretchy, so it's worth a few moments of pinning to avoid a messy finish or wonky piece. Be sure to at least pin the beak and tail (tricky shifties!)
** Now, make note, on your bird, of the two smaller dots on the bottom edge. You can use two pins, or mark these dots with a disappearing ink pen. This will be the opening to stuff your ornament.
SEW. . . .
** Sew your birds together, stitching close to the edge (about 1/8") starting at one of the small dots you marked, and stopping at the other small dot, leaving the small opening unsewn for now. Be sure to do a reinforcing stitch (it's just one back-and-forth stitch) when you both start and stop, and when you sew over your hanging ribbon.
use the same PIVOT trick on the beak and tail that we used on the wing point
STUFF. . . .
** Carefully stuff your ornament with polyfil, taking care not to stretch the opening too wide. (This could make for a lumpy, wonky finish when closing the hole.)
** TIP: Stuff the beak first, with a tiny bit of polyfil first, then fill the rest of the body, with the tail being last. Use a pencil to help poke the stuffing well into the beak and tail.
CLOSE. . . .
** Pin the opening closed.
** Sew the opening closed, either by hand or machine. Machine sewing is faster and neater, but make sure you place your needle exactly in one of the previous stitches where you had stopped, and try to end the closure in line with the other stitches. (Don't forget to reinforce!)
But wait! You could add a lovely blanket stitch (or other decorative stitches) around the edge, in a contrasting color of embroidery floss. It's easy to do, takes just a little extra time, and makes the ornament look super spiffy!
And now for more options. . . .
** Cut 1 felt bird, 1 fabric bird, and 1 wing from your choice of felt or fabric. Continue with the tutorial as written. . . .
** Cut 2 felt birds, and 1 wing from your choice of felt or fabric. Do not cut out a burlap bird at this time.
** Now, place one of your felt bird pieces on the burlap.
** Flip the bird piece over on the burlap, and pin in place.
use the same PIVOT trick for the beak and tail as
we used above for the wing point
** Handle the burlap gently, as it tends to shred and flake a bit.
** Now, embellish the burlap side of the bird as you desire. Here, I attached a fabric wing, as I did in Option 1 above.
** Add a hanging ribbon, stuff and finish the ornament as above.
I found it easier (and less flaky) to pin through the felt,
rather than the burlap. Just watch / feel for pins as you sew!
** When you're finished, trim the fraying edges of the burlap if you like.
** Attach the tag just as you would the wing in the Option 1 EMBELLISH step, and then proceed with the rest of the tutorial as written.
** Cut 2 felt birds (no wing or tag... unless you want one.)
** At the EMBELLISH step, go crazy with the bedazzlements!
** Sew on sequins, buttons, lace... stick on rhinestones... glue (if you trust it) on all of the above... whatever your heart desires!
** Be sure to leave some room for stitching around the edge of the bird, or just hand sew it. This ornament can be a little tricky, depending on the bulkiness of the bling, so sew slowly if needed.
** Proceed with the rest of the tutorial as written.
** Cut 2 felt birds (no wing or tag.)
** At the EMBELLISH step, write the name, date or sentiment on the front of your bird, using a disappearing ink pen, or skip that part if you plan to freehand your design like I did.
** Embroider your design onto the felt. I recommend using 2 or 3 strands of embroidery floss, and a simple back stitch, split stitch or stem stitch. Use whichever you are comfortable using!
** Proceed with assembling and finishing the ornament as written.
And that's it! :)
And that's it! :)
I hope you enjoy this tutorial as much as I enjoyed sewing and writing for it! If you have any questions at all, please ask me in the Comment section below. And if you make any of these ornaments, I'd love to see your creations! Feel free to share them on my facebook page, or link to your creations in the Comment section below.
Talk to you soon!