Saturday, January 17, 2009

Make your own paperback wallet!



I wanted to share my tutorial for making wallets out of old paperback books (or any paper media, really.)

This basic wallet was not my idea... the original link does not work (but here it is anyway.) The original design was flawed, and the wallets ripped the first time you opened them. I changed the design, and made them much, much stronger. My own wallet is over 1 1/2 years in use now, and still going strong. Not bad, huh? I don't mind if anyone sells wallets made from this design, just please don't sell my tutorial. If you have any questions, you can post them in the comments below, and I'll try to answer any you may have.

(And let me apologize in advance for the book cover I used in the tutorial. My regular readers know that this is really not my style! I made this tutorial waaay before I started selling wallets, and had just wanted to experiment with any old cover. . . and now I'm too busy/lazy to re-shoot the photos.)

Enjoy!

Gather your supplies:



  • paperback (or other paper media) that measures at least 4 inches wide, and 7 inches long
  • scrap paper for template (cut to 4" X 7")
  • cardstock for interior
  • scissors
  • ruler
  • packing tape (or other strong tape)
  • glue (optional)
  • pen or pencil
  • snaps (I prefer heavy-duty)
  • snap fastening tool (optional -- many snaps contain the tool)
  • hammer
  • clear vinyl -- available on the bolt and in many remnant bins at fabric stores or even Wal-Mart
  • thread
  • tissue paper (optional, but recommended)
  • sewing machine (recommended, but not necessary if you like to hand sew)
Make template and cut pieces:


**Cut a template measuring 4" X 7" from scrap paper.
**Fold template in half across the middle. You will now have 3.5" on each side.
**Fold ends of template in 1" on each end... these will be the pockets. When those ends are folded in, the wallet should measure 2.5". See pic above for help.... I know I don't explain that part very well.
**Using your template, cut out your cardstock interior piece.
**Fold cardstock interior the same way you folded the template. Set aside.
**Now, cut a piece of vinyl slightly larger than the template. Set aside.
**Using your template, place it on your paperback bookcover where you think you will want to cut. Make sure a crease does not cover a face, or major design element. If it does, don't worry. There are ways around that, as I'll explain in the next step.......
Adjusting for creases or too-short covers
**I don't have an action shot of this step, but I do have a finished example. It's easy to figure out, and I'll try to explain.....
**In this picture, the center crease would have been right across Jack London's face, ruining the design. I needed to shift the design down a bit, but the cover would then be about 1.5 inches too short. You'll need to basically extend the cover a bit with some extra cardstock!

**I just took a piece of scrap cardstock about 2" long, and 4" wide. Place that scrap piece on the back of the book cover on the too-short end. Glue the scrap piece to the bookcover, and then reinforce that part with a small bit of packing tape. (Elmer's purple glue stick works great!) Let it dry a few minutes.

**Now, you can cut out your cover using the template.
**Fold cover just like the template.
Place cardstock interior inside cover:
**Make some folding adjustments to the interior if you need to to get them to fit. It's OK (and normal) if the interior doesn't fit exactly inside the cover. Don't worry -- that will be trimmed later.

Reinforce:

**Place a small piece of packing tape (about 1" square) in the center of each end of cardstock and paperback cover. Make sure you put the tape on the back side of the cover! ;)

Place vinyl:

**Place the vinyl on the cover and interior. Place paperclips on each end, on both sides. Don't use pins.

Adjust all layers:

**Just press and work the vinyl (it can be stubborn) and line up the long edges of the cover and interior, and make sure the pockets will fold and lie fairly flat when you close the wallet.

Mark snap placement:

**Using your pen or pencil, lightly press/mark the spot for the snaps on each pocket. It will be in the center of each pocket... 1/2" from the cut edge, and 2" from either side as in the picture above.

Place snaps:


**UNFOLD the wallet, but keep the clips in place, and lay the wallet flat. Don't shift the papers and vinyl around, or it won't fold back up like you had it.
**Place your snaps on your pen/pencil marks according to the instructions that came with them. The business ends of the snaps will be facing up, towards the cover side, not facing the interior side. I hope that makes sense.

Trim pocket ends:

**I don't have a photo of this step, and apparently I forgot to do it on this wallet, but trim the excess overhang of vinyl and cardstock interior to be even with the cover on the pocket ends.

Refold, and replace paperclips:

**Refold the wallet, and replace the clips on each end, but this time, clip the pocket to the rest of the wallet, like it will look when it's sewn.

Sew:

**Sew along the long edge of the wallet, very close to the edge (about 1/8".) Be sure to remove clips as you come to them!
**Repeat for the other edge.
**Tie off thread on each end.
**Trim any excess vinyl or paper along the sewn edges now.

HELPFUL TIP FOR SEWING VINYL:

**If you're blessed with a rolling foot or teflon foot, definitely break it out for this project.
**Otherwise, use a scrap piece of tissue paper (or the paper that the vinyl is usually wrapped in)... about 1" wide and 8" long... and place it along the long edge before you sew, and hold it in place with those paperclips.
**Sew through all layers -- even the tissue paper -- as described in the previous step.
**When you are finished, just tear off the tissue paper. It will come off clean and very easily!

Finished!



Other tips:

**When fitting the cover to the interior cardstock, it's much easier to make folding adjustments to the cardstock interior than to refold the cover, and it's much less noticeable!
**I love the heavy-duty snaps (and they don't tear the paper, miraculously, because of the extra packing tape reinforcements!!) I have also used smaller and decorative snaps, and they work fine, too... they're just a bit harder to set, and mess up a lot more often during placement.
**Old book covers and papers get brittle and soft with age. BEFORE you fold them (as they will just break into pieces) cover the entire backside with packing tape. The paper may still crack when you fold it, but it won't show or fall apart.
**Try different media -- I've made these for artists and photographers, and had beautiful results! Some day, I want to make a wallet from a photo of my kiddos! :)

I apologize if some of my directions are weirdly worded. Please feel free to ask more questions if you need to!

13 comments:

  1. Very cool and thanks for sharing. I've made something similar just out of cardstock for gift cards, but this is pretty cool. What do you do with the rest of the book? I'm sure there's a useful purpose for an old paperback with no cover :-)

    ReplyDelete
  2. The only complaint I have is that my credit cards/debit card do not fit inside the wallet. I want to use it for that purpose and can't.

    I do like my wallet, but I only can use it for my business cards. I just wish they were a little bigger across (to accommodate a credit card) and a little bigger pockets (meaning that they could hold more cards, etc.) The thinner pocket means that only a few cards can be held on each side.

    Just a few "improvement" ideas...

    ReplyDelete
  3. P.S. a card with our children's photo, NOW *that's* an idea!! So cool! Will you make me a bigger one, like I mentioned above with my kids' photo? I'll mail you the photo...pretty please with a cherry on top!? :0)

    ReplyDelete
  4. Robin -- we keep the books to read, or if they are not good reading material, we recycled them into art projects/collages, or they went to the recycling bin. :)

    Jenn -- I must have made yours too small and tight, because they normally do fit credit/debit cards. Mine actually has 6 in it (ID, debit cards, laminated insurance cards, library card), plus several biz cards and receipts. Check out this post for pictures:
    http://hello-refabulous.blogspot.com/2008/01/just-how-strong-are-those-wallets-and.html
    I'm still carrying that same wallet, and it's holding up fine! These are very sturdy. I'm sorry to hear that yours wasn't up to par... that's the first complaint I've ever had on my wallets! :(

    ReplyDelete
  5. I'm sorry to be the first...I do love it. It's just smaller than I wish it were...not meaning to hurt your feelings. How do you feel about that custom request I posted about?

    Love from TN

    ReplyDelete
  6. I still have the two card wallets we traded for over a year ago . . . one is in my purse EVERY DAY and is still in perfect condition! :D Thanks for the tutorial, I've never worked with vinyl, looks fun!

    ReplyDelete
  7. Just to let you know, I nominated you for the creative blogger award on my site. You don't have to play along, just thought that I wold let you know!

    I'm also putting up a link to this tutorial on Thursday - I love it!

    ReplyDelete
  8. Hi. Louise and Ginger sent me your way! I love the wallets your making...in fact all you things! Great blog, too!

    ReplyDelete
  9. Thank you so much for posting your tutorial! It was VERY easy to understand...no weird directions at all! ;)

    I didn't have any suitable paperbacks on hand, so I improvised.

    I wonder-bonded some fabric onto cardstock and made myself one today. It looks pretty good to me, even if I did let the vinyl get away from me a bit at the folds. I put a picture on my blog!

    I'm sorry that your sweet little Owen is feeling bad. I hope that both of you are getting some rest!

    I'm glad that #7 is over the croup. It's tough when the kids are sick...and the sickness often seems to just be making its way through the kids. When you think you've got one baby well, another one gets sick! It will get better, though!

    ReplyDelete
  10. Thanks for the tute. I have plans to use some vinyl for another project in the future and I'll have to grab some old paperbacks to use the rest of it!

    ReplyDelete
  11. Love this! I'm going to have to try and find some time to make these soon. So clever!

    ReplyDelete
  12. Just found this tutorial but unfortunately it didn't work for me. What type of needle did you use for this? I couldn't get it to sew through all those layers. I'm new to sewing so I assume my needle is probably not strong enough.

    ReplyDelete
  13. I have a question ... do you sell these? If so, what is the copyright law regarding using something that is someone else's artwork. I really fuss over stuff like that, so ... but I love this idea!!!

    ReplyDelete

I love hearing from you!